Diagnostic Equipment

MultiScan P1 (universal Scan Tool)

MultiScan P1, is the new version of MultiScan Plus, its especially designed to Diagnose the vehicles newer than 2009 (CAN BusII), because its contain the Ultraplixer (special unit for CAN BUSII and American vehicles) as a part of the MultiScan P1, its inside the scan tool, so you don’t need to buy a new connectors or anything else, all what you need for your Workshop is MultiScan P1 – The best Scan Tool for (Asian – European – Japanese – American – Malaysian – Chinese – Brazilian – Iran – Latin American) vehicles.

MultiScan P1 Functions:

  1. Read and Erase DTC.
  2. Read actual data (Currant Data).
  3. Actuation Test (activates and de-activate).
  4. Adaptation for new or old parts.
  5. Resetting Basic Setting.
  6. Programming and reprogramming.
  7. Key coding for several vehicles.
  8. TPMS – Tire pressure Monitoring System
  9. Gas analyzer interface. 

MultiScan P1 Coverage:

A high quality compact scan tool that mirrors original factory equipments, manufactured using Hanatech's 16 years of scan tool experience.
Boasts all the features and fully functioning software of more expensive units, Activation, Adaptation, and Reset Basic Settings.
Super fast communication speed, Full size 320X240 backlit screen,
CAN enabled, Big 512mb Flash memory, Real-time PC interface through USB, LED communication check light.

Extensive
MultiScan P1 provides the extensive coverage for most Asian and European vehicles as well as various smaller local manufactures.
 Complete
MultiScan P1 provides complete coverage for various control systems not to mention the ECM or PCM also supports extended functions activation, reset basic settings, adaptation, repair guides, etc.
Reliable
512MB large capacity memory includes all software applications on board. No additional cost spending for optional software package - only a 16pin OBD2 adapter will enable you to test all carts with OBD2 data link connector up to manufacturer specific level regardless of brand name.
Flexible
MultiScan P1 provides realtime PC interface and windows based click-and-go software update through USB.
MultiScan P1 is also designed to support CAN-BUS communication, which is going to be a simple but serious criterion whether the equipment can be used in the next decade or not.
Technical Specifications
CPU Dual 16bit 33§Ö Processor
Memory 1 Mbyte SRAM
Program Card 512Mbyte built-in Flash memory
LCD 320X240 Monochrome Graphic LCD with Backlight
Key Pad 20 Membrane keys, embossing type
Com Port USB and RS232

Diamond Trade Co. (special offer for 2009 & 2010 only) :

  1. We are the Sole Agent for Egypt and North Africa.
  2. We offer 2 Years warranty for the main unit.
  3. We offer 2 years free update via internet.
  4. We offer 1 year free Tech. Support.

Tech2 – Original Scan Tool for (GM – Opel – Holden – Vauxhall – Suzuki – Isuzu)

The Tech-2 is diagnostic Scan Tool for GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru current year.

Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech 2 Specifications
Dimensions
12″×6″×2″

Microprocessor
32 bit, 16 MHz

Memory
32 MB flash type II PCMCIA. Type III slot available for future expansion.

Communications
Integral RS232 communication port.

Screen
3.8″×2.8″ backlit monochrome with full graphics capability: 320×240 pixels. Displays up to 9 vehicle parameters at once

GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):

Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi) and instruction sheet download ( 199.2 kb )
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/Security features
Data/Sensor/Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
Storage Case

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash¡¯s diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.


UltraScan Pro


UltraScan P1 (Diagnostic Scan Tool & Engine Analyzer)

UltraScan P1, is the new version of UltraScan Plus, its especially designed to Diagnose the vehicles newer than 2009 (CAN BusII), because its contain the Ultraplixer (special unit for CAN BUSII and American vehicles) as a part of the UltraScan P1, its inside the scan tool, so you don’t need to buy a new connectors or anything else, all what you need for your Workshop is UltraScan P1 – The best Scan Tool for (Asian – European – Japanese – American – Malaysian – Chinese – Brazilian – Iran – Latin American) vehicles.

UltraScan P1 Functions:

  1. Read and Erase DTC.
  2. Read actual data (Currant Data).
  3. Actuation Test (activates and de-activate).
  4. Adaptation for new or old parts.
  5. Resetting Basic Setting.
  6. Programming and reprogramming.
  7. Key coding for several vehicles.
  8. TPMS – Tire pressure Monitoring System
  9. Gas analyzer interface. 

UltraScan P1 Coverage:

 

UltraScan Engine Analyzer Functions : 
1- Oscilloscope
- Four cannels: Displays up to 4 scope graphs at one time.
- High speed digital scope: Sampling rate 500kHz.
- 19 pre setup sensor selection : Auto setup, Standard Pattern presentation
- HOST-PRO Real-time PC interface : view waveforms by PC screen through USB
2- Ignition Pattern Analyzer

- Primary & Secondary Ignition Pattern
- Conventional and DLI/DIS engine.
- Display Mode
- HOST-PRO Real-time PC interface

3- Digital Multimeter

- Dual Channel
- Voltage Meter : DC 30V
- Frequency Meter : 1 Hz~100kHz
- Duty Cycle : 0 ~ 99.9 %
- Current Meter : 0 ~ 128A (Optional)

4- Emission Analyzer Interface

- Reliability
- Business Solution

Technical Specifications
 
Internal Memory 1 Mbyte SRAM
Memory Card 512 Mbyte built-in Flash memory
LCD 320X240 Monochrome Graphic LCD with Backlight
Key Pad Membrane keypad
Quality system ISO9001 and QS9000 certified
EMC compliance CE / C-tick / FCC approved

Yes Key – programming and coding Keys

Features:

  1. Connect via Diagnostic connectors.
  2. Read pin code for immobilizer.
  3. Coding new keys.
  4. Erase lost or old keys.
  5. Save data and transfer it to PC.
  6. USB interface with PC.
  7. Update via internet (2 years free update).
  8.  Warranty and grantee for 2 years (main Unit only).
  9. Free tech. support for 1 year.